diff options
Diffstat (limited to 'bin/install-chimere.sh')
| -rwxr-xr-x | bin/install-chimere.sh | 420 |
1 files changed, 0 insertions, 420 deletions
diff --git a/bin/install-chimere.sh b/bin/install-chimere.sh deleted file mode 100755 index 3b0b1c6..0000000 --- a/bin/install-chimere.sh +++ /dev/null @@ -1,420 +0,0 @@ -#!/bin/bash - -set -e - -command_exists() { - command -v "$@" > /dev/null 2>&1 -} - -# Check if this is a forked Linux distro -check_forked() { - # Check for lsb_release command existence, it usually exists in forked distros - if command_exists lsb_release; then - # Check if the `-u` option is supported - set +e - lsb_release -a -u > /dev/null 2>&1 - lsb_release_exit_code=$? - set -e - - # Check if the command has exited successfully, it means we're in a forked distro - if [ "$lsb_release_exit_code" = "0" ]; then - # Print info about current distro - cat <<-EOF - You're using '$lsb_dist' version '$dist_version'. -EOF - - # Get the upstream release info - lsb_dist=$(lsb_release -a -u 2>&1 | tr '[:upper:]' '[:lower:]' | grep -E 'id' | cut -d ':' -f 2 | tr -d '[[:space:]]') - dist_version=$(lsb_release -a -u 2>&1 | tr '[:upper:]' '[:lower:]' | grep -E 'codename' | cut -d ':' -f 2 | tr -d '[[:space:]]') - - # Print info about upstream distro - cat <<-EOF - Upstream release is '$lsb_dist' version '$dist_version'. -EOF - fi - fi -} - -do_install() { - - cat >&2 <<-'EOF' -******************************************************************************* -++++++ Chimère installation script ++++++ -******************************************************************************* - -EOF - - # check user - user="$(id -un 2>/dev/null || true)" - - sh_c='sh -c' - if [ "$user" != 'root' ]; then - if command_exists sudo; then - sh_c='sudo -E sh -c' - elif command_exists su; then - sh_c='su -c' - else - cat >&2 <<-'EOF' - Error: this installer needs the ability to run commands as root. - We are unable to find either "sudo" or "su" available to make this happen. -EOF - exit 1 - fi - fi - - # check distribution - lsb_dist='' - dist_version='' - if command_exists lsb_release; then - lsb_dist="$(lsb_release -si)" - fi - if [ -z "$lsb_dist" ] && [ -r /etc/lsb-release ]; then - lsb_dist="$(. /etc/lsb-release && echo "$DISTRIB_ID")" - fi - if [ -z "$lsb_dist" ] && [ -r /etc/debian_version ]; then - lsb_dist='debian' - fi - if [ -z "$lsb_dist" ] && [ -r /etc/fedora-release ]; then - lsb_dist='fedora' - fi - if [ -z "$lsb_dist" ] && [ -r /etc/oracle-release ]; then - lsb_dist='oracleserver' - fi - if [ -z "$lsb_dist" ]; then - if [ -r /etc/centos-release ] || [ -r /etc/redhat-release ]; then - lsb_dist='centos' - fi - fi - if [ -z "$lsb_dist" ] && [ -r /etc/os-release ]; then - lsb_dist="$(. /etc/os-release && echo "$ID")" - fi - - lsb_dist="$(echo "$lsb_dist" | tr '[:upper:]' '[:lower:]')" - - case "$lsb_dist" in - - ubuntu) - if command_exists lsb_release; then - dist_version="$(lsb_release --codename | cut -f2)" - fi - if [ -z "$dist_version" ] && [ -r /etc/lsb-release ]; then - dist_version="$(. /etc/lsb-release && echo "$DISTRIB_CODENAME")" - fi - ;; - - debian) - dist_version="$(cat /etc/debian_version | sed 's/\/.*//' | sed 's/\..*//')" - case "$dist_version" in - 8) - dist_version="jessie" - ;; - 7) - dist_version="wheezy" - ;; - esac - ;; - - oracleserver) - # need to switch lsb_dist to match yum repo URL - lsb_dist="oraclelinux" - dist_version="$(rpm -q --whatprovides redhat-release --queryformat "%{VERSION}\n" | sed 's/\/.*//' | sed 's/\..*//' | sed 's/Server*//')" - ;; - - fedora|centos) - dist_version="$(rpm -q --whatprovides redhat-release --queryformat "%{VERSION}\n" | sed 's/\/.*//' | sed 's/\..*//' | sed 's/Server*//')" - ;; - - *) - if command_exists lsb_release; then - dist_version="$(lsb_release --codename | cut -f2)" - fi - if [ -z "$dist_version" ] && [ -r /etc/os-release ]; then - dist_version="$(. /etc/os-release && echo "$VERSION_ID")" - fi - ;; - - - esac - - # Check if this is a forked Linux distro - check_forked - - case "$lsb_dist" in - ubuntu|debian) - ;; - *) - cat >&2 <<-'EOF' - - Sorry. Either your platform is not easily detectable or not supported by - this installer. - -EOF - exit 1 - esac - - default_db='' - cat >&2 <<-'EOF' - -------------------------------------------------------------------------------- - A PostgreSQL database is needed to install Chimère. If you do not plan to use - a database host on another computer you need to install PostgreSQL. - -EOF - while [ "$default_db" == '' ] - do - read -p '* Default PostgreSQL host? [localhost] ' choice - if [ "$choice" == '' ]; then - default_db='127.0.0.1' - elif [ "$choice" == 'localhost' ]; then - default_db='127.0.0.1' - else - default_db=$choice - fi - done - - webserver='' - cat >&2 <<-'EOF' - -------------------------------------------------------------------------------- - A webserver is needed to make Chimère available to the outside. - Be carreful if another webserver is already configured, you'll have to serve - your pages on a different port. - -EOF - MSG="" - while [ "$webserver" == '' ] - do - read -p '* Which webserver do you want to use? ([nginx]/none) ' choice - case "$choice" in - nginx ) webserver="nginx";; - none ) webserver="none";; - '' ) webserver="nginx";; - esac - done - - version='' - cat >&2 <<-'EOF' - -------------------------------------------------------------------------------- - Two version are usually available for Chimère: master/v3.0. Master is the - bleeding edge version and you can experience problems with this version. - v3.0 is the safest choice. - -EOF - while [ "$version" == '' ] - do - read -p "* Which version would you like to use? ([v3.0]/master) " choice - case "$choice" in - v3.0 ) version="v3.0";; - master ) version="master";; - '' ) version="v3.0";; - esac - done - - etc_path="/etc/chimere/" - if [ -d "$etc_path" ]; then - echo "" - echo "ERROR: it seems that "$etc_path" already exists. If this is a remnant " - echo "of an old installation please delete this path before installing." - exit 1 - fi - - - use_virtualenv='' - cat >&2 <<-'EOF' - - -------------------------------------------------------------------------------- - Do you want to use a virtualenv for python libraries? If "yes" libraries not - available on your linux distribution will be isolated to be used only for - Chimère other with theses library will be available system-wide. If the main - use of this webserver is Chimère it should be OK to install theses libraries - system-wide but the safest choice should be to use a virtualenv (a little - more space is needed). - -EOF - while [ "$use_virtualenv" == '' ] - do - read -p "* Use a virtualenv? [yes]/no " choice - if [ -z "$choice" ]; then - use_virtualenv='yes' - elif [ "$choice" == 'yes' ]; then - use_virtualenv='yes' - elif [ "$choice" == 'no' ]; then - use_virtualenv='no' - fi - done - - - install_path='' - cat >&2 <<-'EOF' - - -------------------------------------------------------------------------------- - By default Chimère base path is '/srv/'. With this base path Chimère is - installed in '/srv/chimere/choosen_version/'. - -EOF - while [ "$install_path" == '' ] - do - read -p "* Which base install path for Chimère? [/srv] " choice - if [ -z "$choice" ]; then - install_path='/srv' - elif [ ! -d "$choice" ]; then - echo 'Not a valid path.' - else - install_path=$choice - fi - done - - full_install_path=$install_path'/chimere/' - if [ -d "$full_install_path" ]; then - echo "" - echo "ERROR: it seems that "$full_install_path" already exists. If this is a " - echo "remanant of an old installation please delete this directory before installing." - exit 1 - fi - - echo "" - echo "*******************************************************************************" - echo "" - - # Run setup for each distro accordingly - case "$lsb_dist" in - ubuntu|debian) - if [ "$dist_version" != "jessie" ]; then - cat >&2 <<-'EOF' - - Sorry this script cannot manage your version of Debian/Ubuntu. - -EOF - exit 1 - fi - - set +e - cat /etc/apt/sources.list | grep jessie-backports | grep -v "^ *#" > /dev/null - if [ $? == 1 ]; then - cat >&2 <<-'EOF' - - Before installing Chimère you need to add backports to your sources.list. - For instance, run: - echo "deb http://ftp.debian.org/debian jessie-backports main contrib" >> \ - /etc/apt/sources.list - -EOF - exit 1 - fi - set -e - - export DEBIAN_FRONTEND=noninteractive - ( set -x; $sh_c 'sleep 3; apt-get update' ) - if [ "$default_db" == 'localhost' ]; then - echo "-------------------------------------------------------------------------------"; - echo "Installing postgresql..."; - echo ""; - if [ "$dist_version" == "jessie" ]; then - POSTGIS=postgresql-9.4-postgis-2.1 - fi - ( set -x; $sh_c 'sleep 3; apt-get install -y -q postgresql '$POSTGIS ) - fi - if ! command_exists git; then - echo "-------------------------------------------------------------------------------"; - echo "Installing git..."; - echo ""; - ( set -x; $sh_c 'sleep 3; apt-get install -y -q git' ) - fi - if ! command_exists apg; then - echo "-------------------------------------------------------------------------------"; - echo "Installing apg..."; - echo ""; - ( set -x; $sh_c 'sleep 3; apt-get install -y -q apg' ) - fi - if ! command_exists pip3; then - echo "-------------------------------------------------------------------------------"; - echo "Installing pip3 and dev libraries..."; - echo ""; - ( set -x; $sh_c 'sleep 3; apt-get install -y -q python3-pip libexiv2-dev libboost-python-dev' ) - fi - if [ "$use_virtualenv" == 'yes' ]; then - echo "-------------------------------------------------------------------------------"; - echo "Installing virtualenv..."; - echo ""; - ( set -x; $sh_c 'sleep 3; apt-get install -y -q virtualenv' ) - fi - if [ "$webserver" == 'nginx' ]; then - echo "-------------------------------------------------------------------------------"; - echo "Installing nginx and uwsgi..."; - echo ""; - ( set -x; $sh_c 'sleep 3; apt-get install -y -q uwsgi uwsgi-plugin-python3 nginx' ) - fi - - echo "-------------------------------------------------------------------------------"; - echo "Installing Chimère dependencies" - echo ""; - ( set -x; $sh_c 'sleep 3; apt-get install -y -q \ - -t jessie-backports python3-django python3-django-haystack' ) - ( set -x; $sh_c 'sleep 3; apt-get install -y -q \ - python3-bs4 python3-psycopg2 gettext python3-pil \ - python3-lxml python3-feedparser python3-icalendar python3-chardet \ - python3-gdal python3-osmapi python3-geopy' ) - - ;; - - esac - - if [ "$use_virtualenv" == 'yes' ]; then - echo "-------------------------------------------------------------------------------"; - echo "Set virtualenv" - echo ""; - ( set -x; $sh_c 'virtualenv '$install_path'"/chimere-venv" --system-site-package -p /usr/bin/python3' ) - source $install_path"/chimere-venv/bin/activate" - fi - - echo "-------------------------------------------------------------------------------"; - echo "Installing py3exiv2" - echo ""; - - ( set -x; $sh_c 'pip3 install py3exiv2==0.2.1' ) - echo "-------------------------------------------------------------------------------"; - echo "Installing pysolr" - echo ""; - ( set -x; $sh_c 'pip3 install pysolr==3.3' ) - - echo "-------------------------------------------------------------------------------"; - echo "Installing Chimère sources" - echo ""; - - mkdir -p $full_install_path - cd $full_install_path - ( set -x; git clone https://gitlab.com/iggdrasil/chimere.git 2> /dev/null ) - cd chimere - git fetch 2> /dev/null - git checkout $version 2> /dev/null - - mkdir -p $etc_path - echo "INSTALL_PATH="$full_install_path > $etc_path"config" - echo "DEFAULT_DB="$default_db >> $etc_path"config" - echo "WEBSERVER="$webserver >> $etc_path"config" - echo "VERSION="$version >> $etc_path"config" - if [ "$use_virtualenv" == 'yes' ]; then - echo "VENV="$install_path"/chimere-venv" >> $etc_path"config" - else - echo "VENV=" >> $etc_path"config" - fi - echo "" - echo "*******************************************************************************"; - echo ""; - echo "Installation done." - echo ""; - echo "* configuration file: "$etc_path"config" - echo "* source and instances path: "$full_install_path - if [ "$use_virtualenv" == 'yes' ]; then - echo "* virtualenv path: "$install_path"/chimere-venv" - fi - echo ""; - echo "Next you'll have to create an instance." - echo ""; - -} - -do_install |