summaryrefslogtreecommitdiff
path: root/install/ishtar-install
diff options
context:
space:
mode:
Diffstat (limited to 'install/ishtar-install')
-rwxr-xr-xinstall/ishtar-install423
1 files changed, 423 insertions, 0 deletions
diff --git a/install/ishtar-install b/install/ishtar-install
new file mode 100755
index 000000000..defdf7766
--- /dev/null
+++ b/install/ishtar-install
@@ -0,0 +1,423 @@
+#!/bin/bash
+
+set -e
+
+cecho() {
+ local code="\033["
+ case "$1" in
+ black | bk) color="${code}0;30m";;
+ red | r) color="${code}1;31m";;
+ green | g) color="${code}1;32m";;
+ yellow | y) color="${code}1;33m";;
+ blue | b) color="${code}1;34m";;
+ purple | p) color="${code}1;35m";;
+ cyan | c) color="${code}1;36m";;
+ gray | gr) color="${code}0;37m";;
+ *) local text="$1"
+ esac
+ [ -z "$text" ] && local text="$color$2${code}0m"
+ echo -e "$text"
+}
+
+command_exists() {
+ command -v "$@" > /dev/null 2>&1
+}
+
+# Check if this is a forked Linux distro
+check_forked() {
+ # Check for lsb_release command existence, it usually exists in forked distros
+ if command_exists lsb_release; then
+ # Check if the `-u` option is supported
+ set +e
+ lsb_release -a -u > /dev/null 2>&1
+ lsb_release_exit_code=$?
+ set -e
+
+ # Check if the command has exited successfully, it means we're in a forked distro
+ if [ "$lsb_release_exit_code" = "0" ]; then
+ # Print info about current distro
+ cat <<-EOF
+ You're using '$lsb_dist' version '$dist_version'.
+EOF
+
+ # Get the upstream release info
+ lsb_dist=$(lsb_release -a -u 2>&1 | tr '[:upper:]' '[:lower:]' | grep -E 'id' | cut -d ':' -f 2 | tr -d '[[:space:]]')
+ dist_version=$(lsb_release -a -u 2>&1 | tr '[:upper:]' '[:lower:]' | grep -E 'codename' | cut -d ':' -f 2 | tr -d '[[:space:]]')
+
+ # Print info about upstream distro
+ cat <<-EOF
+ Upstream release is '$lsb_dist' version '$dist_version'.
+EOF
+ fi
+ fi
+}
+
+do_install() {
+
+ echo ""
+ cecho g "*******************************************************************************"
+ cecho g "++++++ Ishtar installation script ++++++"
+ cecho g "*******************************************************************************"
+ echo ""
+
+ # check user
+ user="$(id -un 2>/dev/null || true)"
+
+ sh_c='sh -c'
+ if [ "$user" != 'root' ]; then
+ if command_exists sudo; then
+ sh_c='sudo -E sh -c'
+ elif command_exists su; then
+ sh_c='su -c'
+ else
+ cecho r " Error: this installer needs the ability to run commands as root."
+ cecho r " We are unable to find either "sudo" or "su" available to make this happen."
+ exit 1
+ fi
+ fi
+
+ # check distribution
+ lsb_dist=''
+ dist_version=''
+ backports_activated=''
+ if command_exists lsb_release; then
+ lsb_dist="$(lsb_release -si)"
+ fi
+ if [ -z "$lsb_dist" ] && [ -r /etc/lsb-release ]; then
+ lsb_dist="$(. /etc/lsb-release && echo "$DISTRIB_ID")"
+ fi
+ if [ -z "$lsb_dist" ] && [ -r /etc/debian_version ]; then
+ lsb_dist='debian'
+ fi
+ if [ -z "$lsb_dist" ] && [ -r /etc/fedora-release ]; then
+ lsb_dist='fedora'
+ fi
+ if [ -z "$lsb_dist" ] && [ -r /etc/oracle-release ]; then
+ lsb_dist='oracleserver'
+ fi
+ if [ -z "$lsb_dist" ]; then
+ if [ -r /etc/centos-release ] || [ -r /etc/redhat-release ]; then
+ lsb_dist='centos'
+ fi
+ fi
+ if [ -z "$lsb_dist" ] && [ -r /etc/os-release ]; then
+ lsb_dist="$(. /etc/os-release && echo "$ID")"
+ fi
+
+ lsb_dist="$(echo "$lsb_dist" | tr '[:upper:]' '[:lower:]')"
+
+ case "$lsb_dist" in
+
+ ubuntu)
+ if command_exists lsb_release; then
+ dist_version="$(lsb_release --codename | cut -f2)"
+ fi
+ if [ -z "$dist_version" ] && [ -r /etc/lsb-release ]; then
+ dist_version="$(. /etc/lsb-release && echo "$DISTRIB_CODENAME")"
+ fi
+ ;;
+
+ debian)
+ MAINBACKS=`cat /etc/apt/sources.list | grep jessie-backports |grep -v "^#"`
+ ALLBACKS=''
+ if [ "$(ls -A /etc/apt/sources.list.d/)" ]; then
+ ALLBACKS=`cat /etc/apt/sources.list.d/* | grep jessie-backports |grep -v "^#"`
+ fi
+ if [ "$ALLBACKS" != '' ] || [ "$MAINBACKS" != '' ]; then
+ backports_activated='true';
+ fi
+ dist_version="$(cat /etc/debian_version | sed 's/\/.*//' | sed 's/\..*//')"
+ case "$dist_version" in
+ 8)
+ dist_version="jessie"
+ ;;
+ 7)
+ dist_version="wheezy"
+ ;;
+ esac
+ ;;
+
+ oracleserver)
+ # need to switch lsb_dist to match yum repo URL
+ lsb_dist="oraclelinux"
+ dist_version="$(rpm -q --whatprovides redhat-release --queryformat "%{VERSION}\n" | sed 's/\/.*//' | sed 's/\..*//' | sed 's/Server*//')"
+ ;;
+
+ fedora|centos)
+ dist_version="$(rpm -q --whatprovides redhat-release --queryformat "%{VERSION}\n" | sed 's/\/.*//' | sed 's/\..*//' | sed 's/Server*//')"
+ ;;
+
+ *)
+ if command_exists lsb_release; then
+ dist_version="$(lsb_release --codename | cut -f2)"
+ fi
+ if [ -z "$dist_version" ] && [ -r /etc/os-release ]; then
+ dist_version="$(. /etc/os-release && echo "$VERSION_ID")"
+ fi
+ ;;
+
+
+ esac
+
+ # Check if this is a forked Linux distro
+ check_forked
+
+ case "$lsb_dist" in
+ ubuntu|debian)
+ ;;
+ *)
+ echo ""
+ cecho r " Sorry. Either your platform is not easily detectable or not supported by"
+ cecho r " this installer."
+ echo ""
+ exit 1
+ esac
+
+ default_db=''
+ cat >&2 <<-'EOF'
+
+-------------------------------------------------------------------------------
+ A PostgreSQL database is needed to install Ishtar. If you do not plan to use
+ a database host on another computer you need to install PostgreSQL.
+
+EOF
+ while [ "$default_db" == '' ]
+ do
+ cecho y '* Default PostgreSQL host? [localhost] '
+ read choice
+ if [ "$choice" == '' ]; then
+ default_db='127.0.0.1'
+ elif [ "$choice" == 'localhost' ]; then
+ default_db='127.0.0.1'
+ else
+ default_db=$choice
+ fi
+ done
+
+ webserver=''
+ cat >&2 <<-'EOF'
+
+-------------------------------------------------------------------------------
+ A webserver is needed to make Ishtar available to the outside.
+ Be carreful if another webserver is already configured, you'll have to serve
+ your pages on a different port.
+
+EOF
+ MSG=""
+ while [ "$webserver" == '' ]
+ do
+ cecho y '* Which webserver do you want to use? ([nginx]/none) '
+ read choice
+ case "$choice" in
+ nginx ) webserver="nginx";;
+ none ) webserver="none";;
+ '' ) webserver="nginx";;
+ esac
+ done
+
+ version=''
+ cat >&2 <<-'EOF'
+
+-------------------------------------------------------------------------------
+ Two version are usually available for Ishtar: develop/master. Develop is the
+ bleeding edge version and you can experience problems with this version.
+ Master is the safest choice.
+
+EOF
+ while [ "$version" == '' ]
+ do
+ cecho y "* Which version would you like to use? ([develop]/master) "
+ read choice
+ case "$choice" in
+ develop ) version="develop";;
+ master ) version="master";;
+ '' ) version="develop";;
+ esac
+ done
+
+ etc_path="/etc/ishtar/"
+ if [ -d "$etc_path" ]; then
+ echo ""
+ cecho r "ERROR: it seems that "$etc_path" already exists. If this is a remnant "
+ cecho r "of an old installation please delete this path before installing."
+ echo ""
+ exit 1
+ fi
+
+
+ install_path=''
+ cat >&2 <<-'EOF'
+
+-------------------------------------------------------------------------------
+ By default Ishtar base path is '/srv/'. With this base path Ishtar is
+ installed in '/srv/ishtar/choosen_version/'.
+
+EOF
+ while [ "$install_path" == '' ]
+ do
+ cecho y "* Which base install path for Ishtar? [/srv/]"
+ read choice
+ if [ -z "$choice" ]; then
+ install_path='/srv'
+ elif [ ! -d "$choice" ]; then
+ echo 'Not a valid path.'
+ else
+ install_path=$choice
+ fi
+ done
+
+ full_install_path=$install_path'/ishtar/'
+ if [ -d "$full_install_path" ]; then
+ echo ""
+ cecho r "ERROR: it seems that "$full_install_path" already exists. If this is a "
+ cecho r "remnant of an old installation please delete this directory before installing."
+ echo ""
+ exit 1
+ fi
+
+ echo ""
+ cecho g "*******************************************************************************"
+ echo ""
+
+ # Run setup for each distro accordingly
+ case "$lsb_dist" in
+ ubuntu|debian)
+ if [ "$dist_version" != "jessie" ] && [ "$dist_version" != "wheezy" ]; then
+ echo ""
+ cecho r " Sorry this script cannot manage your version of Debian/Ubuntu."
+ echo ""
+ exit 1
+ fi
+
+ echo "-------------------------------------------------------------------------------";
+ cecho y "Update debian packages cache";
+ echo "";
+ export DEBIAN_FRONTEND=noninteractive
+ ( set -x; $sh_c 'sleep 3; apt-get update' )
+ if ! command_exists git; then
+ echo "-------------------------------------------------------------------------------";
+ cecho y "Installing git...";
+ echo "";
+ ( set -x; $sh_c 'sleep 3; apt-get install -y -q git' )
+ fi
+ if ! command_exists apg; then
+ echo "-------------------------------------------------------------------------------";
+ cecho y "Installing apg...";
+ echo "";
+ ( set -x; $sh_c 'sleep 3; apt-get install -y -q apg' )
+ fi
+ if ! command_exists pip; then
+ echo "-------------------------------------------------------------------------------";
+ cecho y "Installing pip...";
+ echo "";
+ ( set -x; $sh_c 'sleep 3; apt-get install -y -q python-pip' )
+ fi
+ if [ "$webserver" == 'nginx' ]; then
+ echo "-------------------------------------------------------------------------------";
+ cecho y "Installing nginx and uwsgi...";
+ echo "";
+ ( set -x; $sh_c 'sleep 3; apt-get install -y -q uwsgi uwsgi-plugin-python nginx' )
+ fi
+
+ if [ "$dist_version" == "wheezy" ]; then
+ if [ "$default_db" == '127.0.0.1' ]; then
+ echo "-------------------------------------------------------------------------------";
+ cecho y "Installing postgresql"
+ echo ""
+ POSTGIS=postgresql-9.1-postgis
+ ( set -x; $sh_c 'sleep 3; apt-get install -y -q postgresql '$POSTGIS )
+ fi
+
+ echo "-------------------------------------------------------------------------------";
+ cecho y "Installing Ishtar dependencies"
+ echo "";
+ ( set -x; $sh_c 'sleep 3; apt-get install -y -q python python-django \
+ libjs-jquery libjs-jquery-ui python-pisa python-django-registration \
+ python-utidylib python-lxml python-imaging python-django-south \
+ python-psycopg2 python-gdal gettext python-unicodecsv memcached \
+ python-tidylib python-django-extra-views python-memcache python-dbf' )
+
+ echo "-------------------------------------------------------------------------------";
+ cecho y "Installing BeautifulSoup4"
+ echo "";
+
+ ( set -x; $sh_c 'pip install BeautifulSoup4==4.3.2' )
+ echo "-------------------------------------------------------------------------------";
+ cecho y "Installing django-simple-history"
+ echo "";
+ ( set -x; $sh_c 'pip install git+https://github.com/treyhunner/django-simple-history.git@0fd9b8e9c6f36b0141367b502420efe92d4e21ce' )
+
+ fi
+
+ if [ "$dist_version" == "jessie" ]; then
+ if [ "$backports_activated" != 'true' ]; then
+ echo ""
+ cecho r " In order to install Ishtar you have to activate Debian backports."
+ echo " To do that:"
+ echo ""
+ echo " echo 'deb http://ftp.debian.org/debian jessie-backports main contrib non-free' >> /etc/apt/sources.list"
+ echo ""
+ cecho p " Run again Ishtar installation script after that."
+ exit 1
+ fi
+
+ if [ "$default_db" == '127.0.0.1' ]; then
+ echo "-------------------------------------------------------------------------------";
+ cecho y "Installing postgresql"
+ echo ""
+ POSTGIS=postgresql-9.4-postgis-2.3
+ ( set -x; $sh_c 'sleep 3; apt-get install -y -q postgresql '$POSTGIS )
+ fi
+ echo "-------------------------------------------------------------------------------";
+ cecho y "Installing Ishtar dependencies"
+ echo "";
+ ( set -x; $sh_c 'sleep 3; apt-get install -t jessie-backports -y -q python python-django\
+ python-django-registration' )
+ ( set -x; $sh_c 'sleep 3; apt-get install -y -q \
+ python-pisa python-bs4 python-django-formtools\
+ python-tidylib python-lxml python-imaging python-html5lib\
+ python-psycopg2 python-gdal gettext python-unicodecsv memcached \
+ python-django-extra-views python-memcache python-dbf python-markdown' )
+ echo "-------------------------------------------------------------------------------";
+ cecho y "Installing django-simple-history"
+ echo "";
+ ( set -x; $sh_c 'pip install git+https://github.com/treyhunner/django-simple-history.git@1.8.2#egg=django-simple-history' )
+
+ fi
+ ;;
+
+ esac
+ echo "-------------------------------------------------------------------------------";
+ cecho y "Installing Ishtar sources"
+ echo "";
+
+ cd $install_path
+ if [ "$dist_version" == "wheezy" ]; then
+ ( set -x; git clone https://nimn@gitlab.com/iggdrasil/oook_replace.git 2> /dev/null )
+ fi
+ ( set -x; git clone https://gitlab.com/iggdrasil/ishtar.git 2> /dev/null )
+ cd ishtar
+ git fetch 2> /dev/null
+ git checkout $version 2> /dev/null
+
+ mkdir -p $etc_path
+ echo "ISHTAR_PATH="$full_install_path > $etc_path"config"
+ echo "ISHTAR_DB="$default_db >> $etc_path"config"
+ echo "ISHTAR_WEBSERVER="$webserver >> $etc_path"config"
+ echo "# settings added to all instances" >> $etc_path"extra_settings.py"
+ echo ""
+ cecho g "*******************************************************************************"
+ echo "";
+ cecho g "Installation done."
+ cecho g "Base configuration stored in: "$etc_path"config"
+ echo ""
+ echo "You can edit "$etc_path"extra_settings.py to add Django settings to all new"
+ echo "instances.";
+ echo "";
+ cecho y "Next you will have to create an instance with: ./ishtar-prepare-instance"
+ echo "";
+
+}
+
+do_install
+
generated by cgit v1.2.3 (git 2.39.1) at 2025-10-16 23:37:43 +0000