summaryrefslogtreecommitdiff
path: root/install/install-ishtar.sh
diff options
context:
space:
mode:
Diffstat (limited to 'install/install-ishtar.sh')
-rw-r--r--install/install-ishtar.sh349
1 files changed, 0 insertions, 349 deletions
diff --git a/install/install-ishtar.sh b/install/install-ishtar.sh
deleted file mode 100644
index 4c5995ca0..000000000
--- a/install/install-ishtar.sh
+++ /dev/null
@@ -1,349 +0,0 @@
-#!/bin/sh
-
-set -e
-
-command_exists() {
- command -v "$@" > /dev/null 2>&1
-}
-
-# Check if this is a forked Linux distro
-check_forked() {
- # Check for lsb_release command existence, it usually exists in forked distros
- if command_exists lsb_release; then
- # Check if the `-u` option is supported
- set +e
- lsb_release -a -u > /dev/null 2>&1
- lsb_release_exit_code=$?
- set -e
-
- # Check if the command has exited successfully, it means we're in a forked distro
- if [ "$lsb_release_exit_code" = "0" ]; then
- # Print info about current distro
- cat <<-EOF
- You're using '$lsb_dist' version '$dist_version'.
-EOF
-
- # Get the upstream release info
- lsb_dist=$(lsb_release -a -u 2>&1 | tr '[:upper:]' '[:lower:]' | grep -E 'id' | cut -d ':' -f 2 | tr -d '[[:space:]]')
- dist_version=$(lsb_release -a -u 2>&1 | tr '[:upper:]' '[:lower:]' | grep -E 'codename' | cut -d ':' -f 2 | tr -d '[[:space:]]')
-
- # Print info about upstream distro
- cat <<-EOF
- Upstream release is '$lsb_dist' version '$dist_version'.
-EOF
- fi
- fi
-}
-
-do_install() {
-
- cat >&2 <<-'EOF'
-
-*******************************************************************************
-++++++ Ishtar installation script ++++++
-*******************************************************************************
-
-EOF
-
- # check user
- user="$(id -un 2>/dev/null || true)"
-
- sh_c='sh -c'
- if [ "$user" != 'root' ]; then
- if command_exists sudo; then
- sh_c='sudo -E sh -c'
- elif command_exists su; then
- sh_c='su -c'
- else
- cat >&2 <<-'EOF'
- Error: this installer needs the ability to run commands as root.
- We are unable to find either "sudo" or "su" available to make this happen.
-EOF
- exit 1
- fi
- fi
-
- # check distribution
- lsb_dist=''
- dist_version=''
- if command_exists lsb_release; then
- lsb_dist="$(lsb_release -si)"
- fi
- if [ -z "$lsb_dist" ] && [ -r /etc/lsb-release ]; then
- lsb_dist="$(. /etc/lsb-release && echo "$DISTRIB_ID")"
- fi
- if [ -z "$lsb_dist" ] && [ -r /etc/debian_version ]; then
- lsb_dist='debian'
- fi
- if [ -z "$lsb_dist" ] && [ -r /etc/fedora-release ]; then
- lsb_dist='fedora'
- fi
- if [ -z "$lsb_dist" ] && [ -r /etc/oracle-release ]; then
- lsb_dist='oracleserver'
- fi
- if [ -z "$lsb_dist" ]; then
- if [ -r /etc/centos-release ] || [ -r /etc/redhat-release ]; then
- lsb_dist='centos'
- fi
- fi
- if [ -z "$lsb_dist" ] && [ -r /etc/os-release ]; then
- lsb_dist="$(. /etc/os-release && echo "$ID")"
- fi
-
- lsb_dist="$(echo "$lsb_dist" | tr '[:upper:]' '[:lower:]')"
-
- case "$lsb_dist" in
-
- ubuntu)
- if command_exists lsb_release; then
- dist_version="$(lsb_release --codename | cut -f2)"
- fi
- if [ -z "$dist_version" ] && [ -r /etc/lsb-release ]; then
- dist_version="$(. /etc/lsb-release && echo "$DISTRIB_CODENAME")"
- fi
- ;;
-
- debian)
- dist_version="$(cat /etc/debian_version | sed 's/\/.*//' | sed 's/\..*//')"
- case "$dist_version" in
- 8)
- dist_version="jessie"
- ;;
- 7)
- dist_version="wheezy"
- ;;
- esac
- ;;
-
- oracleserver)
- # need to switch lsb_dist to match yum repo URL
- lsb_dist="oraclelinux"
- dist_version="$(rpm -q --whatprovides redhat-release --queryformat "%{VERSION}\n" | sed 's/\/.*//' | sed 's/\..*//' | sed 's/Server*//')"
- ;;
-
- fedora|centos)
- dist_version="$(rpm -q --whatprovides redhat-release --queryformat "%{VERSION}\n" | sed 's/\/.*//' | sed 's/\..*//' | sed 's/Server*//')"
- ;;
-
- *)
- if command_exists lsb_release; then
- dist_version="$(lsb_release --codename | cut -f2)"
- fi
- if [ -z "$dist_version" ] && [ -r /etc/os-release ]; then
- dist_version="$(. /etc/os-release && echo "$VERSION_ID")"
- fi
- ;;
-
-
- esac
-
- # Check if this is a forked Linux distro
- check_forked
-
- case "$lsb_dist" in
- ubuntu|debian)
- ;;
- *)
- cat >&2 <<-'EOF'
-
- Sorry. Either your platform is not easily detectable or not supported by
- this installer.
-
-EOF
- exit 1
- esac
-
- default_db=''
- cat >&2 <<-'EOF'
-
--------------------------------------------------------------------------------
- A PostgreSQL database is needed to install Ishtar. If you do not plan to use
- a database host on another computer you need to install PostgreSQL.
-
-EOF
- while [ "$default_db" == '' ]
- do
- read -p '* Default PostgreSQL host? [localhost] ' choice
- if [ "$choice" == '' ]; then
- default_db='127.0.0.1'
- elif [ "$choice" == 'localhost' ]; then
- default_db='127.0.0.1'
- else
- default_db=$choice
- fi
- done
-
- webserver=''
- cat >&2 <<-'EOF'
-
--------------------------------------------------------------------------------
- A webserver is needed to make Ishtar available to the outside.
- Be carreful if another webserver is already configured, you'll have to serve
- your pages on a different port.
-
-EOF
- MSG=""
- while [ "$webserver" == '' ]
- do
- read -p '* Which webserver do you want to use? ([nginx]/none) ' choice
- case "$choice" in
- nginx ) webserver="nginx";;
- none ) webserver="none";;
- '' ) webserver="nginx";;
- esac
- done
-
- version=''
- cat >&2 <<-'EOF'
-
--------------------------------------------------------------------------------
- Two version are usually available for Ishtar: master/stable. Master is the
- bleeding edge version and you can experience problems with this version.
- Stable is the safest choice.
-
-EOF
- while [ "$version" == '' ]
- do
- read -p "* Which version would you like to use? ([stable]/master) " choice
- case "$choice" in
- stable ) version="stable";;
- master ) version="master";;
- '' ) version="stable";;
- esac
- done
-
- etc_path="/etc/ishtar/"$version"/"
- if [ -d "$etc_path" ]; then
- echo ""
- echo "ERROR: it seems that "$etc_path" already exists. If this is a remnant "
- echo "of an old installation please delete this path before installing."
- exit 1
- fi
-
-
- install_path=''
- cat >&2 <<-'EOF'
-
--------------------------------------------------------------------------------
- By default Ishtar base path is '/srv/'. With this base path Ishtar is
- installed in '/srv/ishtar/choosen_version/'.
-
-EOF
- while [ "$install_path" == '' ]
- do
- read -p "* Which base install path for Ishtar? [/srv/] " choice
- if [ -z "$choice" ]; then
- install_path='/srv/'
- elif [ ! -d "$choice" ]; then
- echo 'Not a valid path.'
- else
- install_path=$choice
- fi
- done
-
- full_install_path=$install_path'/ishtar/'$version
- if [ -d "$full_install_path" ]; then
- echo ""
- echo "ERROR: it seems that "$full_install_path" already exists. If this is a "
- echo "remnant of an old installation please delete this directory before installing."
- exit 1
- fi
-
- echo ""
- echo "*******************************************************************************"
- echo ""
-
- # Run setup for each distro accordingly
- case "$lsb_dist" in
- ubuntu|debian)
- if [ "$dist_version" != "wheezy" ]; then
- cat >&2 <<-'EOF'
-
- Sorry this script cannot manage your version of Debian/Ubuntu.
-
-EOF
- exit 1
- fi
-
- export DEBIAN_FRONTEND=noninteractive
- ( set -x; $sh_c 'sleep 3; apt-get update' )
- if [ "$default_db" == 'localhost' ]; then
- POSTGIS=postgresql-9.1-postgis
- if [ "$dist_version" == "jessie" ]; then
- POSTGIS=postgresql-9.4-postgis-2.1
- fi
- ( set -x; $sh_c 'sleep 3; apt-get install -y -q postgresql '$POSTGIS )
- fi
- if ! command_exists git; then
- echo "-------------------------------------------------------------------------------";
- echo "Installing git...";
- echo "";
- ( set -x; $sh_c 'sleep 3; apt-get install -y -q git' )
- fi
- if ! command_exists apg; then
- echo "-------------------------------------------------------------------------------";
- echo "Installing apg...";
- echo "";
- ( set -x; $sh_c 'sleep 3; apt-get install -y -q apg' )
- fi
- if ! command_exists pip; then
- echo "-------------------------------------------------------------------------------";
- echo "Installing pip...";
- echo "";
- ( set -x; $sh_c 'sleep 3; apt-get install -y -q python-pip' )
- fi
- if [ "$webserver" == 'nginx' ]; then
- echo "-------------------------------------------------------------------------------";
- echo "Installing nginx and uwsgi...";
- echo "";
- ( set -x; $sh_c 'sleep 3; apt-get install -y -q uwsgi uwsgi-plugin-python nginx' )
- fi
-
- echo "-------------------------------------------------------------------------------";
- echo "Installing Ishtar dependencies"
- echo "";
- ( set -x; $sh_c 'sleep 3; apt-get install -y -q python python-django \
- libjs-jquery libjs-jquery-ui python-pisa python-django-registration \
- python-utidylib python-lxml python-imaging python-django-south \
- python-psycopg2 python-gdal gettext python-unicodecsv memcached \
- python-tidylib python-django-extra-views python-memcache python-dbf' )
- ;;
-
- esac
- echo "-------------------------------------------------------------------------------";
- echo "Installing BeautifulSoup4"
- echo "";
-
- ( set -x; $sh_c 'pip install BeautifulSoup4==4.3.2' )
- echo "-------------------------------------------------------------------------------";
- echo "Installing django-simple-history"
- echo "";
- ( set -x; $sh_c 'pip install git+https://github.com/treyhunner/django-simple-history.git@0fd9b8e9c6f36b0141367b502420efe92d4e21ce' )
-
- echo "-------------------------------------------------------------------------------";
- echo "Installing Ishtar sources"
- echo "";
-
- mkdir -p $full_install_path
- cd $full_install_path
- ( set -x; git clone git://git.proxience.com/git/oook_replace.git 2> /dev/null )
- ( set -x; git clone https://gitlab.com/iggdrasil/ishtar.git 2> /dev/null )
- cd ishtar
- git fetch 2> /dev/null
- git checkout $version 2> /dev/null
-
- mkdir -p $etc_path
- echo "PATH="$full_install_path > $etc_path"config"
- echo "DEFAULT_DB="$default_db >> $etc_path"config"
- echo "WEBSERVER="$webserver >> $etc_path"config"
- echo ""
- echo "*******************************************************************************";
- echo "";
- echo "Installation done. Base configuration stored in "$etc_path"config file."
- echo "Next you'll have to create an instance."
- echo "";
-
-}
-
-do_install
-
generated by cgit v1.2.3 (git 2.39.1) at 2025-10-18 02:16:01 +0000